IF SAW Filter
Part Number Package Application Last Modified
815-IF44.0M-B 15.9 x 5.9 Thru Hole Digital A/V & Broadcasting May 22 2003
.
TYPE :
44.00 MHz Bandpass Filter
6.2 MHz Bandwidth

PART NUMBER :
815-IF44.0M-B
.
Horizontal : 1.5 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.8 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 43.93 44.00 44.07 MHz
Insertion Loss (Input Voltage : 12V) - 13.0 15.0 dB
3 dB Bandwidth 6.2 6.24 - MHz
30 dB Bandwidth - 7.63 7.68 MHz
Lower Sidelobe (35.0 ~ 39.7 MHz) 35 35.7 - dB
Upper Sidelobe (48.0 ~ 55.0 MHz) 34 35.6 - dB
Passband Ripple - 0.6 1.0 dB
Group Delay Variation - 60 100 nsec
Absolute Delay (at Fo) - 1.45 - µsec
Temperature Coefficient - -72 - ppm/K
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source Impedance = 50 ohms
Load Impedance = 2 Kohms / 3pF
Part No.:
815-IF44.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map