IF SAW Filter
Part Number Package Application Last Modified
815-IF36.125M-A 15.9 x 5.9 Thru Hole Digital A/V & Broadcasting May 22 2003
.
TYPE :
36.125 MHz Bandpass Filter
8.0 MHz Bandwidth

PART NUMBER :
815-IF36.125M-A
.
Horizontal : 2.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.4 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 36.06 36.125 36.19 MHz
Insertion Loss (Input Voltage : 8V) - 15.5 17.0 dB
3 dB Bandwidth 8.0 8.02 - MHz
30 dB Bandwidth - 9.44 9.50 MHz
Lower Sidelobe (25.0 ~ 31.2 MHz) 35 36.4 - dB
Upper Sidelobe (41.0 ~ 50.0 MHz) 32 34.4 - dB
Passband Ripple - 0.52 0.8 dB
Group Delay Variation - 55 80 nsec
Absolute Delay (at Fo) - 1.33 - µsec
Temperature Coefficient - -72 - ppm/K
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source Impedance = 50 ohms
Load Impedance = 2 Kohms / 3pF
Part No.:
815-IF36.125M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map