IF SAW Filter
Part Number Package Application Last Modified
815-IF115.24M-A 15.9 x 5.9 Thru Hole Digital Broadcasting May 02 2003
.
TYPE :
115.24 MHz Bandpass Filter
2.8 MHz Bandwidth

PART NUMBER :
815-IF115.24M-A
.
Horizontal : 1.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.5 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 115.19 115.24 115.29 MHz
Insertion Loss - 21 24 dB
1.5dB Bandwidth 2..8 2.88 - MHz
30dB Bandwidth - 4.3 4.5 MHz
40dB Bandwidth - 4.45 4.7 MHz
Passband Ripple - 0.7 1.0 dB
Group Delay Variation - 77 100 nsec
Absolute Delay - 1.68 - µsec
Ultimate Rejection 40 45 - dB
Substrate Material - LT - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
815-IF115.24M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map