IF SAW Filter
Part Number Package Application Last Modified
813-IF75.0M-C 13.3 x 6.5 SMD Base Station & Repeater May 24 2003
.
TYPE :
75.0 MHz Bandpass Filter
19.8 MHz Bandwidth

PART NUMBER :
813-IF75.0M-C
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 74.92 75.00 75.08 MHz
Insertion Loss - 22.5 24.0 dB
1dB Bandwidth 19.1 19.5 - MHz
3dB Bandwidth 19.8 20.0 - MHz
33dB Bandwidth - 21.7 22.0 MHz
40dB Bandwidth - 22.0 22.5 MHz
Passband Ripple - 0.75 1.0 dB
Group Delay Variation - 50 120 nsec
Absolute Delay - 1.10 - µsec
Ultimate Rejection - 42 - dB
Substrate Material - LN - -
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L2 = 330nH C2 = 10pF
Source/Load Impedance = 50 ohms
Part No.:
813-IF75.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map