IF SAW Filter
Part Number Package Application Last Modified
813-IF75.0M-B 13.3 x 6.5 SMD Base Station & Repeater May 02 2003
.
TYPE :
75.0 MHz Bandpass Filter
19.0 MHz Bandwidth

PART NUMBER :
813-IF75.0M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 74.92 75.0 75.08 MHz
Insertion Loss - 23.5 25.0 dB
1dB Bandwidth 18.75 18.82 - MHz
3dB Bandwidth 19.00 19.25 - MHz
35dB Bandwidth - 20.95 21.00 MHz
Ultimate Rejection 35 42 - dB
Passband Ripple - 0.75 1.0 dB
Group Delay Variation - 40 100 nsec
Absolute Delay - 1.10 - µsec
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L2 = 390nH C2 = 20pF
Source/Load Impedance = 50 ohms
Part No.:
813-IF75.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map