IF SAW Filter
Part Number Package Application Last Modified
813-IF70.0M-T 13.3 x 6.5 SMD Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
12.2 MHz Bandwidth

PART NUMBER :
813-IF70.0M-T
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.90 70.0 70.10 MHz
Insertion Loss - 24.5 26.0 dB
1dB Bandwidth 11.65 11.86 - MHz
3dB Bandwidth 12.20 12.34 - MHz
40dB Bandwidth - 14.60 14.80 MHz
Ultimate Rejection - 40 - dB
Passband Ripple - 0.80 1.0 dB
Group Delay Variation - 40 150 nsec
Absolute Delay - 1.08 - µsec
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
813-IF70.0M-T

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map