IF SAW Filter
Part Number Package Application Last Modified
813-IF70.0M-CA 13.3 x 6.5 SMD Base Station & Repeater May 30 2003
.
TYPE :
70.0 MHz Bandpass Filter
9.7 MHz Bandwidth

PART NUMBER :
813-IF70.0M-CA
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 70.00 - MHz
Insertion Loss - 22.5 24.0 dB
1dB Bandwidth 9.2 9.3 - MHz
3dB Bandwidth 9.7 9.8 - MHz
40dB Bandwidth - 11.7 12.0 MHz
Passband Ripple (Fo 4.0MHz) - 0.80 1.0 dB
Group Delay Variation (Fo 4.0MHz) - 60 150 nsec
Ultimate Rejection 40 42 - dB
Temperature Coefficient - -18 - ppm/K
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 150nH C1 = 33pF
L2 = (330+15)nH C2 = 51pF
Source/Load Impedance = 50 ohms
Part No.:
813-IF70.0M-CA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map