IF SAW Filter
Part Number Package Application Last Modified
813-IF70.0M-BA 13.3 x 6.5 SMD Base Station & Repeater May 02 2003
.
TYPE :
70.0 MHz Bandpass Filter
9.0 MHz Bandwidth

PART NUMBER :
813-IF70.0M-BA
.
Horizontal : 2.0 MHz/Div
Veritical : 10 dB/Div
Horizontal : 1.0 MHz/Div
Veritical : 1 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 70.0 - MHz
Insertion Loss - 22.2 24.0 dB
1dB Bandwidth - 9.00 - MHz
3dB Bandwidth 9.30 9.33 - MHz
40dB Bandwidth - 10.67 11.00 MHz
Passband Ripple - 0.8 1.5 dB
Group Delay Variation - 70 150 nsec
Absolute Delay - 1.59 - µsec
Substrate Material - LT - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 150nH C1 = 56pF
L2 = 369nH C2 = 62pF
Source/Load Impedance = 50 ohms
Part No.:
813-IF70.0M-BA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map