IF SAW Filter
Part Number Package Application Last Modified
813-IF140.0M-H 13.3 x 6.5 SMD Base Station & Repeater May 30 2003
.
TYPE :
140.0 MHz Bandpass Filter
18.8 MHz Bandwidth

PART NUMBER :
813-IF140.0M-H
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 140.0 - MHz
Insertion Loss - 21.5 24.0 dB
1dB Bandwidth 18.3 18.35 - MHz
3dB Bandwidth 18.8 18.85 - MHz
40dB Bandwidth - 20.95 21.2 MHz
Ultimate Rejection - 50 - dB
Passband Ripple - 0.9 1.5 dB
Group Delay Variation - 40 100 nsec
Absolute Delay - 1.56 - µsec
Substrate Material - LN - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


Source/Load Impedance = 50 ohms
Part No.:
813-IF140.0M-H

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map