IF SAW Filter
Part Number Package Application Last Modified
813-IF140.0M-G 13.3 x 6.5 SMD Base Station & Repeater May 30 2003
.
TYPE :
140.0 MHz Bandpass Filter
9.6 MHz Bandwidth

PART NUMBER :
813-IF140.0M-G
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 139.9 140.0 140.1 MHz
Insertion Loss - 21.5 23.0 dB
1dB Bandwidth 8.8 9.0 - MHz
3dB Bandwidth 9.6 9.8 - MHz
40dB Bandwidth - 12.0 12.5 MHz
Passband Ripple (Fo 4.0MHz) - 0.85 1.2 dB
Group Delay Variation (Fo 4.0MHz) - 70 150 nsec
Ultimate Rejection 40 42 - dB
Temperature Coefficient - -18 - ppm/K
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 33nH C1 = 43pF
L2 = 47nH C2 = 33pF
Source/Load Impedance = 50 ohms
Part No.:
813-IF140.0M-G

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map