IF SAW Filter
Part Number Package Application Last Modified
811-IF85.38M-A 11.6 x 5.0 SMD Mobile Communication June 17 2003
.
TYPE :
85.38 MHz Bandpass Filter
1.26 MHz Bandwidth

PART NUMBER :
811-IF85.38M-A
.
Horizontal : 0.5 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1 dB/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 85.36 85.38 85.40 MHz
Insertion Loss - 10.95 12.5 dB
5dB Bandwidth 1.26 1.31 - MHz
33dB Bandwidth - 1.76 1.80 MHz
Attenuation at Fo 0.9 MHz 33 38 - dB
Attenuation at Fo 1.25 MHz 33 47 - dB
Attenuation at Fo 1.7 MHz 33 43 - dB
Passband Ripple - 0.3 0.7 dB
Ultimate Rejection 35 42 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 394.7nH L2 = 470nH
C1 = 75pF C2 = 62pF
Source/Load Impedance = 50 ohms
Part No.:
811-IF85.38M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map