IF SAW Filter
Part Number Package Application Last Modified
809-IF85.38M-B 9.1 x 4.8 SMD Mobile Communication May 22 2003
.
TYPE :
85.38 MHz Bandpass Filter
1.26 MHz Bandwidth

PART NUMBER :
809-IF85.38M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 85.38 - MHz
Insertion Loss - 10.7 12.0 dB
5dB Bandwidth 1.26 1.35 - MHz
33dB Bandwidth - 1.65 1.80 MHz
Attenuation at Fo - 0.9 MHz 35 45 - dB
Attenuation at Fo + 0.9 MHz 35 43 - dB
Attenuation at Fo 1.25 MHz 35 42 - dB
Attenuation at Fo 1.7 MHz 35 43 - dB
Input / Output Impedance - 50 - ohm
Passband Ripple - 0.5 1.0 dB
Ultimate Rejection 35 40 - dB
Substrate Material - Quartz - -
Ambient Temperature - 25 - C
Operating Temperature -30 - +80 C
* All performance include Temperature Variations
** Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 330nH L2 = 390nH
C1 = 75pF C2 = 82pF
Source/Load Impedance = 50 ohms
FREQUENCY RESPONSE
Part No.:
809-IF85.38M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map