SMD Oscillators
Series Number Package Description Last Modified
921 5 x 7 Ceramic 6 Pad LVPECL Output Jan. 01 2007
FEATURES
- High Frequency
- PECL Square Wave
- Ultra-Low Jitter
- Extended Operating Temperature
- SMD Version 6 Pad
- RoHs / Lead Free compliant Rohs compliant smd oscillator
lvpecl crystal oscillator 5x7 ceramic
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS CONDITIONS CHARACTERISTICS UNITS
Output Logic - PECL Square Wave -
Input Voltage (VDD) - 3.3 ±5%  VDC
Frequency Range (fO) - 106.250 / 212.500 MHz
Operating Temperature (TOPR) - 0 ~ +85 °C
Storage Temperature (TSTG) - -55 ~ +125 °C
Overall Frequency Stability (a) - (e) ±50 max. PPM
(a) Frequency Tolerance Inclusive of Overall Stability -
(b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) -
(c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) -
(d) Load Stability Inclusive of Overall Stability (RL ±5%) -
(e) Aging (@ 25°C) ±3 max. PPM/Y
Current Consumption - 75 max. mA
Rise Time (Tr) - 400 max. (20% to 80% of Waveform) ps
Fall Time (Tf) - 400 max. (20% to 80% of Waveform) ps
Output Voltage (Vol) - Vcc - 1.81V ~ Vcc - 1.02V -
Output Voltage (Voh) - Vcc - 1.025V ~ Vcc - 0.88V -
Load - 50 Ohms
Duty Cycle - 50 ±5 %
Start-Up Time (TS) - 10 max. mS
Phase Jitter (12KHz to 20MHz) RMS: 1 max. ps
specs for oscilent lvpecl oscillator
solder pad layout
PIN CONNECTIONS
#1 Tri-State (Enable High)
#2 Frequency Select:
NC or Vcc: 106.25MHz
GND: 212.50MHz
#3 Ground
#4 Output
#5 Complimentary Output
#6 VDD
.
MARKING
Line 1 Oscilent
Line 2 921
PART NUMBER GUIDE
Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Oper. Temp.
(°C)
Duty Cycle Pin #1 Other
921 - AM - 3 E 1 - T TS - 001
Oscilent
Series
Frequency Select:
NC or Vcc: 106.25MHz
GND: 212.50MHz
3 = 3.3VDC
E = ±50 PPM
1 = 0~+85
T = 50±5%
Tri-State
-
NOTE: - Deviations on all parameters available.  Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections  indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com
Series No.:
921

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map